Buy $49.95
Brown hat stand with a CUSTOM name plate

Headrest Cowboy Hat Stand

Your hat rides crown-up. The brim never touches.

It clamps to your headrest posts and holds the hat from inside the crown.

$49.95 + $10 shipping · Free custom name plate

  • Holds from inside the crown
  • Brim never touches
  • 4 hat sizes: SM, MED, LG, XL
  • Free custom name plate
  • ASA, holds up to sun and weather
  • Ships in 2 pieces, slides together on your headrest

In a real truck

The hat stand mounted on a truck headrest, with a CUSTOM name plate
A straw cowboy hat riding crown-up on the stand behind the headrest
The same hat on the stand, seen from the other side

Swipe for more.

How it mounts

It ships in 2 pieces: the spine, with the arms and the shoes that hold your hat, and the headrest clamp, a hollow clamp with sliding arms. The clamp hole is 17 mm. All 4 rotate-in crescent pairs come with every order, for 10, 12, 12.7 and 14 mm posts.

▶ Watch it mount

  1. The headrest clamp on its own, set on the two headrest posts

    Rotate the closest-fit crescent pair into the clamp. Closest fit is fine; it isn't meant to be snug. Every post gets a crescent; there are no bare posts.

  2. Take the headrest out. With the lock screws loose, slide the clamp onto the posts from below so the sliding arms follow your post spacing.

  3. Put the headrest back in, then tighten the lock screws with a screwdriver.

  4. Slide the spine on by the dovetail. Set your hat on it, crown up.

Good to know. Keep the hat out of your line of sight. Remove via quick release for rear passengers. Don't mount it where a car seat or booster seat goes.

Fits common round headrest posts: 10, 12–12.7 or 14 mm, 12–18 cm apart (about 4.7–7.1 in). If nothing fits, email support@brushlandprints.com for a free replacement.

Name plate (free)

0/9 · letters and spaces only

Preview of your size and plate. The printed plate can look a little different.

Pick your hat size

Size

Same price for every size. Other size? Email support@brushlandprints.com.

Pick a size first.

Specs

SizesSM 6 3/4–6 7/8 · MED 7–7 1/8 · LG 7 1/4–7 3/8 · XL 7 1/2–7 5/8
MountClamps on two round headrest posts, 10, 12–12.7 or 14 mm, 12–18 cm apart
HoldsCrown up, from inside the crown. Brim never touches.
MaterialBrown ASA. UV and weather resistant.Close-up of the brown ASA surface
PlateFree. 8 borders to pick from.
In the box2 pieces: the spine (arms and hat shoes attached) and the headrest clamp (sliding arms), plus 4 crescent pairs (10, 12, 12.7 and 14 mm)
Size markSize name (SM, MED, LG or XL) on the bottom
Price$49.95 + $10 US shipping. Texas sales tax on Texas orders.
DeliveryMade to order. Most orders arrive within 2 weeks.

Pick your size

Buying from us

Made in Texas

Made to order in Texas.

Easy to pay

You pay through Stripe.

How paying works

Questions

Email support@brushlandprints.com. We reply within a day.

Email us

We do custom work too

We design and print custom products to order.

Ask for a quote
Custom sliding rack, front view

Sliding rack

Questions

What hat sizes fit?

Four sizes. SM fits 6 3/4–6 7/8. MED fits 7–7 1/8. LG fits 7 1/4–7 3/8. XL fits 7 1/2–7 5/8. Same price for every size. Other size? Email support@brushlandprints.com.

Will it fit my truck?

It fits common round headrest posts, 10, 12–12.7 or 14 mm, 12–18 cm apart (about 4.7–7.1 in) center to center. The clamp sets on the two posts and the spine slides onto it. If nothing fits, email support@brushlandprints.com for a free replacement.

Does the brim touch anything?

No. It holds the hat crown-up from inside the crown, on two curved shoes, like it sits on your head.

How long until it arrives?

Made to order. Most orders arrive within 2 weeks. Shipping is $10 flat in the US. Texas orders pay Texas sales tax.

More questions  ·  Email us

Find your hat size

Look inside your hat. The size is on the tag or the sweatband.

Your hat sizeStand
6 3/4–6 7/8SM
7–7 1/8MED
7 1/4–7 3/8LG
7 1/2–7 5/8XL

Other size? Email support@brushlandprints.com.