
Headrest Cowboy Hat Stand
Your hat rides crown-up. The brim never touches.
It clamps to your headrest posts and holds the hat from inside the crown.
$49.95 + $10 shipping · Free custom name plate
- Holds from inside the crown
- Brim never touches
- 4 hat sizes: SM, MED, LG, XL
- Free custom name plate
- ASA, holds up to sun and weather
- Ships in 2 pieces, slides together on your headrest
In a real truck



Swipe for more.
How it mounts
It ships in 2 pieces: the spine, with the arms and the shoes that hold your hat, and the headrest clamp, a hollow clamp with sliding arms. The clamp hole is 17 mm. All 4 rotate-in crescent pairs come with every order, for 10, 12, 12.7 and 14 mm posts.
▶ Watch it mount

Rotate the closest-fit crescent pair into the clamp. Closest fit is fine; it isn't meant to be snug. Every post gets a crescent; there are no bare posts.
Take the headrest out. With the lock screws loose, slide the clamp onto the posts from below so the sliding arms follow your post spacing.
Put the headrest back in, then tighten the lock screws with a screwdriver.
Slide the spine on by the dovetail. Set your hat on it, crown up.
Good to know. Keep the hat out of your line of sight. Remove via quick release for rear passengers. Don't mount it where a car seat or booster seat goes.
Fits common round headrest posts: 10, 12–12.7 or 14 mm, 12–18 cm apart (about 4.7–7.1 in). If nothing fits, email support@brushlandprints.com for a free replacement.
Name plate (free)
0/9 · letters and spaces only
Preview of your size and plate. The printed plate can look a little different.
Pick your hat size
Same price for every size. Other size? Email support@brushlandprints.com.
Pick a size first.
Specs
| Sizes | SM 6 3/4–6 7/8 · MED 7–7 1/8 · LG 7 1/4–7 3/8 · XL 7 1/2–7 5/8 |
|---|---|
| Mount | Clamps on two round headrest posts, 10, 12–12.7 or 14 mm, 12–18 cm apart |
| Holds | Crown up, from inside the crown. Brim never touches. |
| Material | Brown ASA. UV and weather resistant.![]() |
| Plate | Free. 8 borders to pick from. |
| In the box | 2 pieces: the spine (arms and hat shoes attached) and the headrest clamp (sliding arms), plus 4 crescent pairs (10, 12, 12.7 and 14 mm) |
| Size mark | Size name (SM, MED, LG or XL) on the bottom |
| Price | $49.95 + $10 US shipping. Texas sales tax on Texas orders. |
| Delivery | Made to order. Most orders arrive within 2 weeks. |
Buying from us
Made in Texas
Made to order in Texas.
Questions
What hat sizes fit?
Four sizes. SM fits 6 3/4–6 7/8. MED fits 7–7 1/8. LG fits 7 1/4–7 3/8. XL fits 7 1/2–7 5/8. Same price for every size. Other size? Email support@brushlandprints.com.
Will it fit my truck?
It fits common round headrest posts, 10, 12–12.7 or 14 mm, 12–18 cm apart (about 4.7–7.1 in) center to center. The clamp sets on the two posts and the spine slides onto it. If nothing fits, email support@brushlandprints.com for a free replacement.
Does the brim touch anything?
No. It holds the hat crown-up from inside the crown, on two curved shoes, like it sits on your head.
How long until it arrives?
Made to order. Most orders arrive within 2 weeks. Shipping is $10 flat in the US. Texas orders pay Texas sales tax.










